News

How to deal with the smoke generated by welding? How to choose a smoke purifier?

Release Date:2022-03-31


Regarding Welding Smoke
The smoke generated by welding is not only a stimulus, but also reduces the operator's focus and increases fatigue, thereby reducing production efficiency.

Welding fumes are also a major factor affecting employee health. As an employer, you must handle the health risks of personnel caused by this correctly,
And add preventive measures. A simple way to reduce health risks is to carry out smoke purification.

There are three ways to deal with welding fumes:

①BVX-100
Desktop single smoking arm smoke purifier.
l Silent device
l Portable single user device
l No need for external pipelines or air compressors
l Powerful airflow, 85 m 3 /h
l Easy to assemble on any workbench upper or lower device
l Innovative connector transforms pressure ventilation device into smoking arm
l Can immediately absorb smoke, particles, and steam
l Two types of filtration device configurations: heavy welding and light dust or light organic solvents and adhesives Application of Mixtures
l When the filter is clogged and needs to be replaced, dual color LED The light is on

②BVX-200
Desktop single smoking arm smoke purifier, can be placed on the desktop or floor.
l The dual station smoking arm design is conducive to dynamic operation Smoke purification
l Silent brushless motor
l Portable design, can be attached to the bottom and sides of the top of the desktop welding device
l Equipped with 2 A diameter 50 mm (2") or  1  A diameter 63 mm (2.5") The Smoking Arm
l The main filter HEPA Efficiency in particles 0.3 When measured in micrometers, it is 99.97% At the same time, there are also An activated carbon filter can remove excess gas
l Deep gas filters have excellent filtering capabilities for gases, such as using solvents or protective coatings Cleaning of layers
l When the filter needs to be replaced, an audible alarm will notify the operator
l Easy to operate desktop remote control switch

③ VFX-1000 smoke purification device
Metcal The new generationcabinet Smoke purification systemProduct. It adopts an improved pre filter, which can enhance Purification efficiency, and its enhanced gas filter
It is active aluminum permanganate Potassium and activated carbon 50/50 Mixtures can be used on a larger scale Smoke purification.
lDigital speed control
lDeep pleated pre filter
lHigh flow high-pressure blower
l3-stage filtration
lBuilt in noise reduction device
lLong life filter with low replacement cost
lRemote speed control
lRemote start/stop interface

When choosing a smoke purifier, choose the appropriate model based on the usage environment and actual workstation. If you have any questions, please feel free to contact us!

展开
Baidu
map