Metcal soldering iron tips use the "Ten Do's and Ten Don'ts"
Release Date：2017-04-19
Metcal soldering iron tipIt is a consumable item, and if attention to details is not paid during use, it will shorten the service life of the Metcal soldering iron tip. So when using the Metcal soldering iron tip, it is important to pay attention to the "ten things to do and ten things not to do".
Ten needs 1. Choose a suitable and as large as possible soldering iron tip, and avoid using small soldering iron tips 2. Use a clean and moist sponge to clean the soldering iron tip 3. Use sponge without sulfur and deionized water 4. When not in use, turn off the system and immerse the soldering iron tip in tin 5. Use a METCAL copper wire ball to clean rusty soldering iron tips 6. Use low-temperature soldering iron tips as much as possible and use specially designed soldering iron tips for soldering 7. The solder wire should be placed directly on the solder pad 8. Avoid using highly reactive soldering flux 9. A disassembly pad should be used to replace the soldering iron tip 10. Use as little soldering flux as possible
Ten, don't 1. Do not use household sponges or rags 2. Don't forget to turn off the system when not in use, and don't forget to immerse the soldering iron tip in tin 3. Do not use any abrasives 4. Do not use soldering iron tips that are too hot 5. Do not use ordinary soldering iron tips for soldering 6. Do not place the solder wire directly on the soldering iron tip 7. Do not use high temperature and no soldering flux 8. Do not use pliers to replace the soldering iron tip, and do not use highly reactive soldering flux 9. Do not apply excessive pressure to the soldering iron tip 10. Do not use the soldering iron tip as a screwdriver or tool
