The Techcon TS1212 pneumatic clamping valve from the United States has a disposable fluid path, compact and lightweight structure, and is easy to use. TS1212 clamping valve can accurately dispense continuous or single point glue to medium and low viscosity fluids. The on/off control of the valve relies on the opening or closing of the polyethylene plastic pipe inside the valve. Adjusting the opening size of the clamped plastic tube can adjust the dispensing droplet or flow rate. In addition, this pneumatic control valve can also adjust the droplet size by adjusting the time. Finally, various types of dispensing needles and nozzles can be used to further achieve precise dispensing output. The only part where the valve comes into contact with the fluid is the disposable plastic pipe. The standard packaging for replacing plastic pipes is 10 pieces per pack. Technical parameters and typical applications of TS1212 pneumatic clamping valve Length: 2.49 "(63mm) Diameter: 1.58 "(40mm) Weight: 0.18 lb. (82 g) Wetting parts: Polyethylene (standard), Polyurethane (optional) Viscosity range: 1-45k CPS Maximum feeding pressure: 60 psi (4.1 bar) Material import: Female Luer Lock Material export: Male Luer Lock Installation: 1/4 "-20UNC-2B Valve working pressure: 50 psi (3.4 bar) minimum TS1212 pneumatic clamping valve is suitable for instant dry glue, anaerobic glue, two-component glue, etc.
TS1212 pneumatic clamping valve requires a clamping tube for use, with the following specifications for different needs: Part number material inner diameter interface 1212-004-002BPK Black PE 0.1" (2.54mm) Male to Female 1212-004-002PK Natural PE 0.1" (2.54mm) Male to Female 1212-004-000PK Natural PE 0.07" (1.78mm) Male to Female 1212-004-100BPK Black PU 0.125" (3.18mm) Male to Female 1212-004-100PK Natural PU 0.125" (3.18mm) Male to Female
