TECHCON Taikang dispensing machine dispensing guideShenzhen Yapude Technology Co., Ltd. will provide you with a detailed explanation. Yapude Technology is a professional agent of American TECHCON Taikang Dispensing Machine/Controller, Dispensing Consumables, Dispensing Needle, Screw Valve, spray Valve and other TECHCON products.
TECHCON Adhesive Guide (Time Pressure Adhesive) Time pressure dispensing is currently the most commonly used dispensing method, and its popularity is due to the need for process control, as it can use disposable dispensing containers that do not require cleaning for dispensing. Our time pressure dispensing process takes a certain amount of time and pressure to create an O-ring into the pre filled syringe. Control the air pressure to drive the material out of the syringe head and onto the application surface through the dispensing needle.
Factors affecting the dispensing of TECHCON glue machine 1. Pressure: Increasing fluid pressure can increase the dispensing size, and vice versa. 2. Time: Increasing the dispensing time can increase the dispensing size, and vice versa. 3. Needle size: Needles with larger inner diameters output larger adhesive dots.
TECHCON dispensing machine basic dispensing criteria 1. Small size point=small needle, low fluid pressure, short dispensing time. 2. Large size dots=large needle tip, high fluid pressure, long dispensing time. 3. Low viscosity fluid=small needle, low pressure, adjust time as needed. 4. High viscosity fluid=large needle (recommended TT conical needle), high pressure, adjust time as needed. 5. The dispensing device forms a 45 degree angle with the surface of the workpiece When the needle approaches the surface of the needle, start dispensing and keep the dispensing device in the same position until the dispensing cycle ends. 7. If vacuum suction is required, use sufficient vacuum to suck the fluid inside the needle. Excessive vacuum can suck air into the fluid and may also suck the fluid into the dispensing machine.
For more information about TECHCON dispensing, please follow Yapude Technology at www.kitechain.com
